D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 367

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide After clicking the WIDS AP Rogue Classification tab, the following page will appear: Figure 2-32 AP RF Scan Status - WIDS AP Rogue Classification window The fields that can be displayed are described below: Parameter Description MAC Address Status Test Description Condition Detected Reporting MAC Address Radio The MAC address of the detected AP. This could be a physical radio interface or VAP MAC. For D-Link APs this is always a VAP MAC address. Display the managed status of the AP, whether this is a valid AP known to the Switch or a Rogue on the network. The valid values are: • Managed - The neighbor AP is managed by the wireless system. • Standalone - The AP is managed in standalone mode and configured as a valid AP entry (local or RADIUS). • Rogue - The AP is classified as a threat by one of the threat detection algorithms. • Unknown - The AP is detected in the network but is not classified as a threat by the threat detection algorithms. Display the tests that were performed, which includes the following: • Administrator-Configured rogue AP • Managed SSID received form an unknown AP • Managed SSID from a fake managed AP • Fake managed AP on an invalid channel • AP without an SSID • Managed SSID detected with incorrect security configuration • Invalid SSID received from managed AP. • AP is operating on an illegal channel • Standalone AP is operating with unexpected configuration. • Unmanaged AP detected on wired network. Display whether the result of the test was true or false. Display the MAC address of the AP that reported the test results. Display which physical radio on the reporting AP was responsible for the test results. 362