D-Link DWS-3160-24TC DWS-3160 Series Web UI Reference Guide - Page 346

DWS-3160 Series Gigabit Ethernet Unified Switch Web UI Reference Guide Figure 2-10 Peer Switch - Configuration window The fields that can be displayed are described below: Parameter Description Total Entries Peer IP Address Configuration Switch IP Address Configuration Timestamp Total number of entries displayed in the table below. The IP address of each peer wireless switch in the cluster that received configuration information. The IP Address of the switch that sent the configuration information. Display which parts of the configuration the switch received from the peer switch. The possible configuration elements can be one or more of the following: • Global - Receive the basic and advanced global settings. • Discovery - Receive the L2 and L3 discovery information, including the VLAN and IP list. • Channel/Power - Receive the RF management settings. • AP Database - Receive the AP database settings. • AP Profiles - Receive the AP profiles settings. • Known Client - Receive the known client database settings. • Captive Portal - Receive the captive portal information. • RADIUS Client - Receive the client RADIUS information. • QoS ACL - Receive the QoS access control lists settings. • QoS DiffServ - Receive the differentiated classes, services and policies. If the switch has not received any configuration for another switch, the value is None. Display when the configuration was applied to the switch. The time is displayed as UTC time and therefore only useful if the administrator has configured each peer switch to use NTP. After clicking the Managed AP tab, the following page will appear: 341