Kyocera FS-C8500DN FS-C8500DN Operation Guide - Page 113

Using the Operation Panel Duplex (Setting the duplex printing) Using the duplexer, you can automatically print on both sides of the paper. The duplexer is mounted underneath the printer. Duplex printing is only available for those media types that can be fed from one of the cassettes. Duplex printing is available for the following paper(media) types: PLAIN PREPRINTED BOND RECYCLED ROUGH LETTERHEAD COLOR COATED PREPUNCHED HIGH QUALITY Note Duplex printing can be also performed from the MP tray. If the paper to be fed from the MP tray does not match the paper size and paper type of the current paper feed source cassette, a paper jam may occur. Binding Modes Binding refers to the manner in which printed pages of paper are joined together (by gluing, stitching, etc.) in book form. The two possible types of binding are: Bind Long Edge, in which pages are joined together along their long edge; and Bind Short Edge, in which they are joined together along their short edge. In selecting a binding type, you must also consider the orientation of the printed page. You can use Bind Long Edge or Bind Short Edge with either landscape or portrait printing. Depending on the binding type and print orientation, the duplexer provides four types of binding. These are: (1) portrait, Bind Long Edge, (2) portrait, Bind Short Edge, (3) landscape, Bind Long Edge, and (4) landscape, Bind Short Edge. The figure below shows these binding methods. (1) Portrait, Bind Long Edge (2) Portrait, Bind Short Edge (3) Landscape, Bind Long Edge Landscape, Bind Short Edge (4) 1 In the Print Settings menu, press U or V to select Duplex. 4-57