Kyocera FS-C8500DN FS-C8500DN Operation Guide - Page 196
Cannot offset, Set the paper
View all Kyocera FS-C8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 196 highlights
Message Cannot staple this Paper. Corrective Action Stapling is not possible because a paper size that cannot be stapled is selected. To print without stapling, press [OK]. Cannot punch this Paper. Punching is not possible because a paper size that cannot be punched is selected. To print without punching, press [OK]. Cannot offset this Paper. Offsetting is not possible because a paper size that cannot be offset is selected. To print without offsetting, press [OK]. Set the paper feed unit. The paper feed unit is not correctly installed. Pull out paper cassette 1. Pull out the paper feed unit and then push it firmly back in. Replace the toner. Newly added jobs are printed in B & W. Replace the color (cyan, magenta, yellow) toner container. Until the container is replaced, printing will take place in black and white mode. For details, refer to ColorToner Empty (Setting when color toner runs out) on page 4-80. Check waste toner box. Finisher tray # is full of Paper. The waste toner box is almost full. Replace the waste toner box. For details, refer to Replacing the Waste Toner Box on page 5-6. The waste toner box is not installed. Install the waste toner box. For details, refer to Replacing the Waste Toner Box on page 5-6. Tray # of the optional 3,000 Sheet Document Finisher has become full. When the printer detects that tray # is empty again, the printer will continue printing into tray #. 6-12 Troubleshooting