Kyocera FS-C8500DN FS-C8500DN Operation Guide - Page 44

Selecting the Right Paper This section describes the guidelines for selecting paper. Condition Avoid using paper that is bent at the edges, curled, dirty, torn, embossed, or contaminated with lint, clay, or paper shreds. Use of paper in these conditions can lead to illegible printing and paper jams, and can shorten the life of the machine. In particular, avoid using paper with a surface coating or other surface treatment. Paper should have as smooth and even a surface as possible. Composition Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat of fusing can cause such paper to give off harmful fumes. Bond paper should contain at least 80 % pulp. Not more than 20 % of the total paper content should consist of cotton or other fibers. Paper Sizes Cassettes and the MP tray are available for the paper sizes listed in the table below. For details, including the paper sizes for the paper feeder (Option) refer to Cassette (1 to 4) Size (Setting the cassette paper size) on page 4-49. The dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length and width. The angle at the corners must be 90° ±0.2°. MP Tray Only Size Envelope C4 229 × 324 mm Envelope C5 162 × 229 mm Envelope Monarch 3-7/8 × 7-1/2 inches Executive 7-1/4 × 10-1/2 inches Envelope #10 4-1/8 × 9-1/2 inches Envelope DL 110 × 220 mm Envelope #9 3-7/8 × 8-7/8 inches Envelope #6 3-5/8 × 6-1/2 inches ISO B5 176 × 250 mm ISO A6 105 × 148 mm JIS B6 128 × 182 mm Hagaki 100 × 148 mm Ofuku-Hagaki 148 × 200 mm Youkei 2 114 × 162 mm Youkei 4 105 × 235 mm Cassette or MP Tray Ledger Legal Letter ISO A3 ISO A4 ISO A5 JIS B4 JIS B5 Statement Folio Oficio II 8.5 × 13.5 8 kai 16 kai Size 11 × 17 inches 8-1/2 × 14 inches 8-1/2 × 11 inches 297 × 420 mm 210 × 297 mm 148 × 210 mm 257 × 364 mm 182 × 257 mm 5-1/2 × 8-1/2 inches 210 × 330 mm 8-1/2 × 13 inches 8-1/2 × 13-1/2 inches 273 × 394 mm 197 × 273 mm 3-4 Handling Paper