Kyocera FS-C8500DN FS-C8500DN Operation Guide - Page 161

Adjust/Maint.: a b 1 ColorCalib.Cycle 2 ColorCalibration 3 Color Regist. [ Exit ] ColorCalib.Cycle:a b 1 *Auto 2 Short 3 Standard [ Exit ] Adjust/Maint. (Adjust/Maintenance selection/ setting) Adjust/Maintenance is used to adjust the print quality and to carry out printer maintenance. The options available in Adjust/Maintenance are as follows: • ColorCalib.Cycle (Automatic color adjustment cycle setting) • ColorCalibration • Color Regist. (Color registration [Standard]) • Color Regist. (Color registration [Detailed]) • Restart (Restart Printer) • Service Setting (for Maintenance) IMPORTANT Service Setting is primarily a menu used by service personnel for maintenance work. There is no need for customers to use this menu. 1 Press [MENU]. 2 Press U or V to select Adjust/Maint.. 3 Press [OK]. The Adjust/Maint. menu appears showing a list of available options. ColorCalib.Cycle (Automatic color adjustment cycle setting) The cycle for automatic execution of color calibration can be selected. The following cycles can be set: Auto Automatic judging and adjustment. Short Gives priority to image quality. The color adjustment cycle is shorter than Standard. Standard Gives equal priority to image quality and printing processing. Long Gives priority to printing processing. The color adjustment cycle is longer than Standard. 1 In the Adjust/Maint. menu screen, press U or V to select ColorCalib.Cycle. 2 Press [OK]. The ColorCalib.Cycle screen appears. 3 Press U or V to select the color adjustment cycle. Using the Operation Panel 4-105