Kyocera FS-C8500DN FS-C8500DN Operation Guide - Page 47

Handling Paper Whiteness: The contrast of the printed page depends on the whiteness of the paper. Whiter paper provides a sharper, brighter appearance. Quality control: Uneven sheet size, corners that are not square, ragged edges, welded (uncut) sheets, and crushed edges and corners can cause the machine to malfunction in various ways. A quality paper supplier should take considerable care to ensure that these problems do not occur. Packaging: Paper should be packed in a sturdy carton to protect it from damage during transport. Quality paper obtained from a reputable supplier is usually correctly packaged. Note You might see the printer emitting steam in the area around the top tray if you use damp paper, but it is safe to continue printing. Special Paper The following types of special paper can be used: Paper Type to be Used Overhead projector transparencies Rough paper Thin paper (60 to 64 g/m²) Label Recycled paper Preprinted paper Bond paper Postcards Colored paper Prepunched paper Letterhead Envelopes Coated paper Thick paper (120 to 220 g/m²) High-quality paper Custom Paper Type to be Selected TRANSPARENCY ROUGH VELLUM LABELS RECYCLED PREPRINTED BOND CARDSTOCK COLOR PREPUNCHED LETTERHEAD ENVELOPE COATED THICK HIGH QUALITY CUSTOM 1~8 Use paper that is sold specifically for use with copiers or printers (heatfusing type). When using transparencies, labels, thin paper, envelopes, postcards, or thick paper, feed the paper from the MP tray. For details, refer to Paper Settings on page 4-46. Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to give trouble during 3-7