Kyocera FS-C8500DN FS-C8500DN Operation Guide - Page 144

AppleTalk: 1 Off 2 *On IPP: 1 *Off 2 On a b AppleTalk (AppleTalk setting) AppleTalk is a communications protocol used primarily on Macintosh computers and also refers to the Mac OS network functions. AppleTalk assigns 24-bit network addresses (a 16-bit network section and an 8-bit node address) that are used to identify devices (computers, printers, etc.) on the network. When the power is turned on, a broadcast signal is sent out onto the network and the addresses and machine names are automatically assigned. The default setting is On. 1 In the Network Security menu, press U or V to select AppleTalk. 2 Press [OK]. The AppleTalk screen appears. a b 3 Press U or V to select whether AppleTalk is enabled. 4 Press [OK]. The AppleTalk setting is set and the Network Security menu reappears. IPP (IPP setting) IPP (Internet Printing Protocol) is a standard that uses TCP/IP networks such as the Internet to enable print jobs to be sent between remote computers and printers. IPP is an extension of the HTTP protocol used to view websites and enables printing to be carried out via routers on printers in remote locations. It also supports the HTTP authentication mechanisms along with SSL server and client authentication as well as encryption. The default setting is Off. 1 In the Network Security menu, press U or V to select IPP. 2 Press [OK]. The IPP screen appears. 3 Press U or V to select whether IPP is enabled. 4 Press [OK]. The IPP setting is set and the Network Security menu reappears. 4-88 Using the Operation Panel