Kyocera TASKalfa 181 Fax System (R) Operation Guide - Page 123

Other Features of this Fax Note 1 If you want to cancel the procedure part way through, press the Reset key. The operation panel will return to the initial mode settings. Set the documents you want to transmit. 2 If you want to designate a time for the transmission to begin, press the Delayed TX key. The letter T will be displayed on the first line of the message display. If the maximum allowable number of communications that use the timer (max: 50) is reached, an error message will appear in the message display. In this case, press the Enter key and the operation panel will return to the initial mode settings. If you want the transmission to begin right away, this step is not necessary. Proceed to step 3. 3 Use the keypad to enter the fax number of the relay station. :0 You can enter the fax number using abbreviated Document : numbers or one-touch keys that have been designated Press START key. for Subaddress-based Communication as well. If you do use such an abbreviated number or one-touch key, you do not need to perform steps 4 - 7. 4 Open the cover plate to the left and press the Sub-Address key. 5 Use the keypad to enter the appropriate subaddress. Subaddress: This subaddress is required during a Subaddress-based Communication in order to designate the box in the relay station's fax. It can be up Enter Subaddress to 20 digits in length and can include any combination of the numerals 0 - 9. 20 Digits 6 Press the Enter key. 7 If necessary, enter the predetermined Subaddress Communication password. This password is used during a Subaddress-based Communication, but is not required if you agree in advance with the destination party not to use one. Password: Enter Your Password 20 Digits > The password can be up to 20 digits in length and can include any combination of the numerals 0 - 9 and the symbols "*" and "#". > If you DO NOT need to enter a Subaddress Communication password, proceed to step 8. 5-29