Kyocera TASKalfa 181 Fax System (R) Operation Guide - Page 135

Other Features of this Fax 5 Proceed to the procedure for the desired communication. A. Standard Transmission B. Broadcast Transmission C. Polling Reception This page P5-42 P5-44 A. Standard Transmission (Continued from step 5) 6 Make sure that Send is selected in the message display. Program key:02:Select Mode Send If it is NOT selected, press the S key or the T key to Broadcast select it. RX Polling 7 Press the Enter key. 8 Press the S key or the T key to select whether or not you want to designate a time for the transmission to begin. Delayed Comm.: On Off > If you want to designate a time for the transmission to begin, select On and proceed to step 9. > If you want to have the transmission begin immediately after the program key is pressed, select Off and proceed to step 11. 9 Press the Enter key. 10 Use the keypad to enter the desired time for the transmission to begin. If you want to reset the displayed time to "00:00", simply press the Stop/Clear key. TX Time:12:34 Enter TX Time 11 Press the Enter key. 12 Use the keypad to enter a destination fax number. : You can enter the fax number using the keypad, abbreviated numbers, one-touch keys, chain dial keys or the directory. If you enter the fax number using an Enter Fax No. abbreviated number or one-touch key that is already designated for Subaddress-based Communication, you can skip steps 13 through 16. 13 If you want to designate this communication as a Subaddress-based Transmission, press the Sub-Address key. > If you pressed the Sub-Address key, proceed to step 14. > If you DID NOT press the Sub-Address key, proceed to step 17. 14 Enter the subaddress you want to use for this Subaddress-based Transmission. The subaddress can be up to 20 digits in length and can include any combination of the numerals 0 - 9. Subaddress: Enter Subaddress 20 Digits 15 Press the Enter key. 5-41