Kyocera TASKalfa 181 Fax System (R) Operation Guide - Page 185

Various Settings and Registration Turning Remote Diagnosis ON/OFF ("Remote Diagnosis" setting) Especially if trouble occurs in this fax in which it is necessary to call for service, it is possible for our service center computer to access the fax directly over the telephone line and check its status and other information about the trouble. Notes • To use Remote Diagnosis, it is necessary to enter into a contract with an authorized service center in advance and also to register a predetermined Remote Test ID in advance. (See Registering the Remote Test ID ("Remote Test ID" setting) on page 7-18.) For further information, contact your service representative, an authorized service center or the place of purchase. • If you want to cancel the procedure part way through, press the Reset key. The operation panel will return to the initial mode settings. 1 Press the System Menu key. 2 Press the T key to select Fax Default. System Menu / Counter Machine Default Printer Default Fax Default 3 Press the Enter key. 4 Press the S key or the T key to select Remote Diag.[Remote diagn.]. Fax Default: F-NET Dest. List Tag Remote Diag. :Off :Alphabet :On 5 Press the Enter key. 6 Press the S key or the T key to select whether to turn Remote Diagnosis ON or OFF. Remote Diag.: *On The asterisk (*) in the message display indicates the Off current setting. 7 Press the Enter key. The setting for Remote Diagnosis is complete. If you are finished making settings, press the Reset key. The operation panel will return to the initial mode settings. 7-17