Canon EOS C70 Instruction Manual - Page 114
Master Black Green]
View all Canon EOS C70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Custom Picture Settings 114 Menu items [Black] [Master Pedestal] [Master Black Red], [Master Black Green], [Master Black Blue] [Black Gamma] [Level] [Range], [Point] [Point] [Level] Output [Range] Input [Low Key Saturation] [Activate] [Level] [Knee] [Activate] [Slope] [Point] [Saturation] [Slope] Options / Additional information -50 to +50 (±0) Increases or decreases the black level. Higher settings will make dark areas brighter but decrease contrast. This setting is not available when the gamma curve component of the [Gamma/Color Space] setting is set to one of the [Canon Log 2] or [Canon Log 3] options. -50 to +50 (±0) These settings correct the color cast in blacks. These settings are not available when the gamma curve component of the [Gamma/Color Space] setting is set to one of the [Canon Log 2] or [Canon Log 3] options. -50 to +50 (±0) -20 to +50 (±0) These settings control the lower part of the gamma curve (dark areas of the image). These settings are only available when the gamma curve component of the [Gamma/Color Space] setting is set to one of the [BT.709 Normal] options. [Level]: Raises or lowers the lower part of the gamma curve. [Range]: Selects the adjustment range from the selected [Point]. [Point]: Determines the shape of the lower part of the gamma curve. [On], [Off] Set this setting to [On] to enable the adjustment of color saturation in dark areas with the [Level] setting. -50 to +50 (±0) Specifies how saturated colors are in dark areas. [On], [Off] Set this setting to [On] to enable the adjustment of the knee point with the following settings. These settings are only available when the gamma curve component of the [Gamma/Color Space] setting is set to one of the [BT.709 Normal] options. -35 to +50 (±0) 50 to 109 (95) -10 to +10 (±0) Output Input [Point] These settings control the upper part of the gamma curve (highlights of the image). By compressing the highlights, you can prevent parts of the image from being overexposed. [Slope]: Determines the slope of the gamma curve above the knee point. [Point]: Sets the knee point of the gamma curve. [Saturation]: Adjusts the color saturation in the highlights. Output Input