Canon EOS C70 Instruction Manual - Page 144
Other Connection Methods, Select [Camera: User Name], [Camera: Password]
View all Canon EOS C70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Configuring Connection Settings 144 Browser Remote This section continues the connection settings wizard (A 141). A user name and password are required to log in to the Browser Remote application. In the function settings you will configure up to three different users for single-user or two-user operation. 1 Select [Create New Func. Setting]. • Once you have added multiple function settings, you can select [Select Existing Setting] to reuse Browser Remote settings that you saved previously. 2 Select the number of users. 3 Enter the user names and passwords as necessary. • Single user: Select [Full: User Name] and [Full: Password]. Two users: Select [Camera: User Name], [Camera: Password], [Meta: User Name] and [Meta: Password]. • Enter the desired user name and password using the keyboard screen (A 25). 4 Select [OK] twice. • The function settings are saved to a [MODE] file. 5 Select the connection setting (SET1 to SET20) where to save the settings and then select [OK]. • The camera will connect to the network and will be ready to accept commands from the Browser Remote application (A 156). Options for [User Setting] [One User (Full)]: A single user who can access all Browser Remote screens. [Two Users (Camera/Meta)]: You will set up two user names and passwords, one who can access the main Browser Remote screen to control the camera ([Camera]) and one who can access the metadata screen to update the user memo and GPS information ([Meta]). NOTES • The same user name cannot be set for both the [Camera] and [Meta] users. Other Connection Methods This section explains how to configure communication settings using methods other than the WPS push button. Ethernet Settings 1 In the [Network Type] screen, select [Ethernet ]. 2 Make sure the Ethernet cable is correctly connected (A 139) and select [Setup with Network Connection]. • Select [Setup without Network Connection] to only configure the settings, without connecting to the network. 3 Set the IP address (A 147). 4 Select [OK] to continue to configure the function settings. • The communication settings are saved to an [NW] file. • Continue with one the following procedures to configure the selected function's settings. FTP transfer (A 141), IP streaming (A 143), Browser Remote (A 144)