Canon EOS C70 Instruction Manual - Page 40
Adjusting the Black Balance, Adjusting the black balance is necessary in the following cases
View all Canon EOS C70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Adjusting the Black Balance Adjusting the Black Balance In CAMERA mode, you can have the camera adjust the black balance automatically when ambient temperature changes considerably or if there is a noticeable change in a true black video signal. 40 1 Attach the body cap to the lens mount and set the camera to CAMERA mode. • If a lens was attached, turn off the camera and remove the lens. Place the body cap back on the lens mount and turn on the camera. 2 Select > [v Camera Setup] > [ABB] > [OK]. • The automatic black balance procedure will start. It may take about 1 minute depending on the frame rate. • If the sensor is not completely shielded from light, [Error] will appear on the screen. Repeat the procedure from the beginning. NOTES Adjusting the black balance is necessary in the following cases: - When using the camera for the very first time or after a long period of not using it. - After sudden or extreme changes in ambient temperature. - After changing the sensor mode. - After activating or deactivating slow & fast motion recording (including switching to another special recording mode). - After changing the shooting frame rate, when slow & fast motion recording is activated. - After resetting the camera's settings. • During the adjustment of the black balance, you may notice some irregular displays appear on the screen. This is not a malfunction.