Canon EOS C70 Instruction Manual - Page 116
Black] > [Master Pedestal], [Master Black Red], White Balance] > [R Gain], [B Gain]
View all Canon EOS C70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Custom Picture Settings 116 Menu items [White Balance] [R Gain], [B Gain] [Color Correction] [Select Area] [Area A Setting Phase], [Area B Setting Phase] [Area A Setting Chroma], [Area B Setting Chroma], [Area A Setting Area], [Area B Setting Area], [Area A Setting Y Level], [Area B Setting Y Level] [Area A Revision Level], [Area B Revision Level] [Area A Revision Phase], [Area B Revision Phase] [Other Functions] [Over 100%] Options / Additional information -50 to +50 (±0) These settings adjust the amount of white balance throughout the whole image by changing the intensity of red tones ([R gain]) and blue tones ([B Gain]). [Off], [Area A], [Area B], [Area A&B] The camera detects areas with certain color characteristics (color phase, chroma, area and Y level) and corrects them when recording. You can set the color correction for up to two different areas (A and B) and apply the color correction to either one ([Area A] or [Area B]) or both of them ([Area A&B]). While color correction is activated, parts of the image that are not detected as having the characteristics specified for area A or B will appear colorless on the screen or the image output from the output terminals (except when adjusting the [Revision Level]/[Revision Phase] settings). 0 to 31 (0) These settings determine the color phase of the area to be corrected (A or B, respectively). 0 to 31 (16) These settings determine the following color characteristics of the area to be corrected (A or B, respectively). [Area A Setting Chroma], [Area B Setting Chroma]: Color saturation. [Area A Setting Area], [Area B Setting Area]: Color range. [Area A Setting Y Level], [Area B Setting Y Level]: Brightness. -50 to +50 (±0) These settings adjust the amount of correction applied to the color saturation in the corrected area (A or B, respectively). -18 to +18 (±0) These settings adjust the amount of correction applied to the color phase in the corrected area (A or B, respectively). [Through], [Press], [Clip] Determines how the camera handles video signals exceeding 100%. This setting is not available when the gamma curve component of the [Gamma/Color Space] setting is set to one of the [Canon Log 2], [Canon Log 3], [PQ] or [HLG] options. [Through]: Leave the signal unchanged. [Press]: Compress a signal of up to 108% down to 100% levels. [Clip]: Clip the signal at 100%. NOTES • Depending on other menu settings, you may not be able to obtain the desired image effect even after changing the custom picture settings. • When an RC-V100 Remote Controller is connected to the camera, the following custom picture settings can be changed using the buttons and dials on the remote controller. - [Black] > [Master Pedestal], [Master Black Red], [Master Black Blue] - [Black Gamma] > [Level] - [Knee] > [Slope], [Point] (only when [Knee] > [Activate] is set to [On]) - [Sharpness] > [Level] - [White Balance] > [R Gain], [B Gain]