Canon EOS C70 Instruction Manual - Page 32

Inserting and Removing an SD Card, Initializing Cards, D CARD acce

Page 32 highlights

Preparing Recording Media Inserting and Removing an SD Card 1 Wait until the SD CARD access indicator is off or is illuminated in green. 32 2 Open the card compartment cover. 3 Insert the card straight, with the label facing the side opposite to the lens, into the SD card slot until it clicks. • You can use two cards, one in each card slot. • To remove the card, make sure the SD CARD indicator is off and then push the card once to release it. When the card springs out, pull it all the way out. 4 Close the card compartment cover. • Do not force the cover closed if the card is not correctly inserted. ቢ SD CARD indicator ብ ባ ቤ SD card access indicator Red Green Off Indicator Card status Accessing the card. Recording/playback is possible and the card is selected for recording/playback. A card is not inserted or the card slot is not currently selected. If you set illuminate. > [B System Setup] > [SD Card Access LED] to [Off], the SD card access indicator will not IMPORTANT • SD cards have front and back sides that are not interchangeable. Inserting a card facing the wrong direction can cause a malfunction of the camera. Be sure to insert the card as shown in the illustration. Initializing Cards Initialize cards when you use them with this camera for the first time. You can also initialize a card to permanently delete all the recordings it contains. 1 Select > [Æ Recording/Media Setup] > [Initialize Media]. 2 Select the desired card. 3 Select [OK]. • The card is initialized and all the data it contains is erased. IMPORTANT • SD cards are initialized using the FAT file system, SDHC cards using the FAT32 file system, and SDXC cards using the exFAT file system. • Initializing a card will permanently erase all data, including photos and protected custom picture files. Lost data cannot be recovered. Make sure you save important recordings in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215

Preparing Recording Media
32
In
s
erting and Removing an SD Card
1 Wait until the
S
D CARD acce
ss
indicator i
s
off or i
s
illuminated in green.
2 Open the card compartment cover.
3 In
s
ert the card
s
traight, with the label facing the
s
ide
oppo
s
ite to the len
s
, into the
S
D card
s
lot until it clic
ks
.
You can use two cards, one in each card slot.
To remove the card, make sure the SD CARD indicator is off
and then push the card once to release it. When the card
springs out, pull it all the way out.
4 Clo
s
e the card compartment cover.
Do not force the cover closed if the card is not correctly
inserted.
S
D card acce
ss
indicator
If you set
> [
B
System Setup] > [SD Card Access LED] to [Off], the SD card access indicator will not
illuminate.
IMPORTANT
SD cards have front and back sides that are not interchangeable. Inserting a card facing the wrong direction
can cause a malfunction of the camera. Be sure to insert the card as shown in the illustration.
Initializing Card
s
Initialize cards when you use them with this camera for the first time. You can also initialize a card to permanently
delete all the recordings it contains.
1
S
elect
> [
Æ
Recording/Media
S
etup] > [Initialize Media].
2
S
elect the de
s
ired card.
3
S
elect [OK].
The card is initialized and all the data it contains is erased.
IMPORTANT
SD cards are initialized using the FAT file system, SDHC cards using the FAT32 file system, and SDXC cards
using the exFAT file system.
Initializing a card will permanently erase all data, including photos and protected custom picture files. Lost data
cannot be recovered. Make sure you save important recordings in advance.
Indicator
Card status
Red
Accessing the card.
Green
Recording/playback is possible and the card is selected for recording/playback.
Off
A card is not inserted or the card slot is not currently selected.
±
±
²
´
SD CARD
indicator