Canon EOS C70 Instruction Manual - Page 162
Activate] button, Overwrite Previou, button, Apply from Next] button, Overwrite] button
View all Canon EOS C70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Browser Remote: Controlling the Camera from a Network Device 162 3 [ Activate] button • Touch the button to give priority to the metadata entered in this screen when recording clips. This overrides the metadata read from a file saved on the SD card. • Alternatively, on the camera, you can set > [Æ Recording/Media Setup] > [Metadata] > [Setting] to [Remote]. 4 [Overwrite Previous] button Send the user memo information from the application, overwriting the metadata of the last clip recorded. 5 [Apply from Next] button Send the user memo information from the application to the camera to be used in clips recorded after that. (Does not overwrite the metadata of already recorded clips.) 6 [Overwrite] button Send the user memo information from the application, overwriting the metadata of the clip currently being recorded. 7 [Clear All] button Touch to delete all the data entered. NOTES • The metadata sent to the camera from Browser Remote will be lost in the following cases. - The camera is turned off. - The > [Æ Recording/Media Setup] > [Metadata] > [Setting] setting was changed. • Using Browser Remote ([ Activate] button) you can give priority to metadata sent from the application. However, you cannot return the priority back to the SD card. To use a user memo file saved on a card you will need to set > [Æ Recording/Media Setup] > [Metadata] > [Setting] to [SD Card] on the camera itself. • If you use Browser Remote to transfer user memo information to a relay clip after the switch, the user memo will not be recorded with the metadata of the clip recorded before the camera switched cards.