Canon EOS C70 Instruction Manual - Page 41

3 Recording 41 Recording Video and Photos This section explains the basics of recording clips* and photos. For details on recording audio, refer to Recording Audio (A 87). * "Clip" refers to a single movie unit recorded with a single recording operation. You can also include metadata with the clip. Recording Power indicator/ Tally lamp SD card access * indicator * Can be assigned to function as a REC button (A 105). 1 Set the Q switch to CAMERA. • The camera turns on in CAMERA mode and enters record standby mode ([STBY]). The power indicator (tally lamp) illuminates in green. • The access indicators of card slots with a card inserted will illuminate momentarily in red. Then, the access indicators of cards selected for recording will change to green. 2 Press the REC button to begin recording. • Recording starts. The tally lamp changes from green (power indicator) to red and the recording indicator at the top of the screen changes from [STBY] to [ÜREC]. • The access indicator of cards used for recording will illuminate in red. • You can also perform this function remotely using Browser Remote on a connected network device (A 160). 3 Press the REC button to stop recording. • The clip is recorded and the camera enters record standby mode. The tally lamp changes from red to green (power indicator). • The access indicator of cards selected for recording will change back to green.