Canon EOS C70 Instruction Manual - Page 137
Network Functions, Network functions and connection types
View all Canon EOS C70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
7 Network Functions Network functions and connection types To be able to use the following function networks, you will need to connect a commercially available Wi-Fi or Ethernet adapter* to the camera's USB terminal. For more details about Wi-Fi or Ethernet adapters tested for use with the camera, visit your local Canon website. * A Type-C (male) to Type-A (female) adapter/cable that is compatible with the same speed standard as the network adapter is necessary when using a network adapter with a Type-A connector. Network function FTP File Transfer IP Streaming Browser Remote Description Wi-Fi Wired network (Ethernet) Infrastructure1 Camera Access Point2 A Transfer clips recorded with the camera to another device connected to the network using the FTP protocol. Ü 153 Stream the camera's live video and audio over IP to a compatible IP video decoder connected Ü Ü to the network. - 154 Control the camera remotely from the Web browser of a connected device. Ü 156 1 Connection to a Wi-Fi network via an external access point (wireless router, etc.) 2 Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point. 137 Before using the network functions • The instructions in this chapter assume you already have a correctly configured and working network and correctly configured network device(s). If necessary, refer to the documentation provided with the network devices you plan to use. • Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet) and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations. IMPORTANT • Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions. • Avoid using open networks or networks without sufficiently strong security settings. Using an unprotected network can expose your data to monitoring by unauthorized third parties. NOTES • Do not open the card compartment cover while using network functions. • Do not place cables connected to the camera's HDMI OUT terminal, INPUT terminals or MIC terminal near the Wi-Fi adapter (commercially available). Doing so may negatively affect the wireless communication or the audio recorded. • Connecting devices to the camera's USB terminal: - When using a terminal converter or adapter cable, make sure to connect the converter to the Wi-Fi or Ethernet adapter before connecting both to the camera's USB terminal. If you plug in the converter or adapter cable to the terminal alone and only then connect the network adapter, it will not be recognized by the camera. - Do not connect to the camera devices other than Wi-Fi or Ethernet adapters tested for use with the camera or the GP-E2 GPS Receiver.