Canon PowerShot G1 X Mark III PowerShot G1X MarkIII Camera User Guide - Page 184

Charging via USB The battery pack can be charged without removing it from the camera by using Compact Power Adapter CA-DC30/CA-DC30E and Interface Cable IFC-600PCU, both sold separately. 1 Insert the battery pack. zzFollow step 1 in "Inserting the Battery Pack and Your Memory Card" (=20) to open the cover. zzInsert the battery pack as described in step 2 of "Inserting the Battery Pack and Your Memory Card" (=20). zzFollow step 3 in "Inserting the Battery Pack and Your Memory Card" (=20) to close the cover. (1) (2) 2 Connect the compact power adapter to the camera. zzWith the camera turned off, open the cover (1). Hold the smaller plug of the interface cable (sold separately) facing as shown and insert the plug fully into the camera terminal (2). zzInsert the larger plug of the interface cable into the compact power adapter. 3 Charge the battery pack. zzCA-DC30: Flip out the plug (1) and plug the compact power adapter into a power outlet (2). zzCA-DC30E: Plug the power cord into the compact power adapter, then plug the other end into a power outlet. zzCharging begins and the USB charge lamp lights up. zzThe lamp turns off when charging finishes. zzRemove the compact power adapter from the power outlet and the interface cable from the camera. ●● To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours. ●● When charging another battery pack, always disconnect the interface cable from the camera before replacing the battery pack for charging. Before Use Basic Guide Advanced Guide Camera Basics Auto Mode / Hybrid Auto Mode Other Shooting Modes P Mode Tv, Av, M, and C Mode Playback Mode Wireless Features Setting Menu Accessories Appendix Index 184