Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1008

Syntax username name {nopassword|password password} [privilege level|adminprofile profile] [encrypted] no username name • name-The name of the user. Range: 1-64 printable characters. The special characters allowed in the username include Question marks are disallowed.User names can contain blanks if the name is surrounded by double quotes. • password-The authentication password for the user. Range: 8-64 characters. This value can be 0 [zero] if the no passwords min-length command has been executed. The special characters allowed in the password include Question marks are disallowed. • level-The user's privilege level. Level 0 can be assigned by a level 15 user to another user to restrict that user's access to the switch. Supported access levels are 0, 1, or 15. Enter access level 0 to disallow login, 1 for Read Access, or 15 for Read/Write Access. • nopassword-Configure a switch administrator with no password. Note that the SSH is configured to require a password to access the switch. Use of a password for administrative access is highly recommended. • profile-The name of the administrative profile(s) to apply to this user. An administrative profile is mutually exclusive with a privilege level. • encrypted-Encrypted password entered, copied from another switch configuration. Password strength checking is not applied to the encrypted string. Default Configuration The default privilege level is 1. Command Mode Global Configuration mode User Guidelines The following rules and restrictions apply: Security Commands 1008