Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 168

Command Description Modea neighbor route-reflector- Configures an internal peer as an IPv4 route client (IPv6 Address Family reflector client. Configuration) IPAF neighbor send-community (BGP Router Configuration) Configures the local router to send the BGP BR communities attribute in UPDATE messages to a specific neighbor. neighbor send-community (IPv6 Address Family Configuration) Tells BGP to send the COMMUNITIES attribute with routes advertised to the peer. IPAF neighbor shutdown Administratively disables communications with BR, a specific BGP neighbor. IPAF neighbor timers Overrides the global keepalive and hold timer BR values as well as set the keepalive and hold timers for a specific neighbor. neighbor update-source Configures BGP to use a specific IP address as BR the source address for the TCP connection with a neighbor. network (BGP Router Configuration) Configures BGP to advertise an address prefix. BR network (IPv6 Address Family Configuration) Identifies network IPv6 prefixes that BGP originates in route advertisements to its neighbors. IPAF redistribute (BGP) Configures BGP to advertise routes learned by BR means outside of BGP. BGP can redistribute local (connected), static, OSPF, and RIP routes. redistribute (BGP IPv6) Configures BGP to redistribute non-BGP routes IPAF from the IPv6 routing table. route-target Creates a list of export, import, or both route PE target (RT) extended communities for the specified VRF instance. set extcommunity rt Sets BGP extended community attributes for RMC the route target. set extcommunity soo Sets BGP extended community attributes for RMC the site of origin. 168 Dell EMC Networking CLI