Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 993

• encrypted - Encrypted password to be entered, copied from another switch configuration. Default Configuration This command has no default configuration. Command Mode AAA IAS User Configuration User Guidelines IAS user accounts are distinct from user (administrator) accounts. IAS accounts give access to network resources (via 802.1X or MAB), whereas user accounts give administrative access to the switch. Example console#configure console(config)#aaa ias-user username client-1 console(config-ias-user)#password client123 console(config-ias-user)#no password The following is an example of adding a MAB Client to the IAS user database with MAC address f81f.3ccc.b157. Be sure to enter the password in upper case letters or authentication will fail with an "MD5 Validation Failure" as the password hash does not match. console#configure console(config)#aaa ias-user username f81f3cccb157 console(config-ias-user)#password F81F3CCCB157 console(config-ias-user)#exit console(config)# password (User Exec) Use the password command in User Exec mode to allow a currently logged in user to change the user password without having read/write privileges. This command should be used after the password has aged. The user is prompted to enter the old password and the new password. The special characters allowed in the password include User names can contain blanks if the name is surrounded by double quotes. Security Commands 993