Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 2382

Unit Switch Management Status Switch Type Preconfigured Model Identifier Plugged-in Model Identifier Switch Status Switch Description Detected Code Version Detected Code in Flash SFS Last Attempt Status Serial Number Description This field displays the unit identifier assigned to the switch. This field indicates whether the switch is the Management Switch, a stack member, or the status is unassigned. This field displays the 32-bit numeric switch type. This field displays the model identifier for this switch. Model Identifier is a 32-character field assigned by Dell to identify the switch. This field displays the model identifier for this switch. Model Identifier is a 32-character field assigned by Dell to identify the switch. If no physical unit is present for the unit number, this field is empty. This field displays the switch status. Possible values are OK, Unsupported, Code Mismatch, Config Mismatch, SDM Mismatch Not Present, Updating Code, or STM Mismatch This field displays the switch description. This field displays the version of code running on this switch. If the switch is not present and the data is from preconfiguration, the code version is "None." This field displays the version of code that is currently stored in FLASH memory on the switch. This code will execute after the switch is reset. If the switch is not present and the data is from preconfiguration, then the code version is "None." This field displays the Stack Firmware Synchronization status. The possible values are: Success, Failure, Min bootcode version not present, None. This field displays the Switch serial number. Switch Management Commands 2382