Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1063

User Guidelines Use this command in conjunction with the automate-tester command to enable testing of RADIUS servers. When all RADIUS servers have been declared dead, 802.1x authenticated clients may be migrated to the critical data VLAN or critical voice VLAN. Newly authenticating clients will be authenticated to the critical data or voice VLAN. Command History Command introduced in version 6.6.0.1 firmware. Example This example globally sets the dead criteria to two attempts with a 10 second timeout. console(config)#radius server dead criteria time 10 tries 2 console(config-auth-radius)#radius-server dead-criteria time 10 tries 2 radius server deadtime Use the radius server deadtime command to configure the minimum amount of time to wait before attempting to recontact an unresponsive RADIUS server. To set the deadtime to 0, use the no form of this command. Syntax radius server deadtime deadtime no radius server deadtime • deadtime - Length of time in minutes, for which a RADIUS server is skipped over by transaction requests. (Range: 0-2000 minutes). Deadtime is used to mark an unavailable RADIUS server as dead until this userconfigured time expires. Deadtime is configurable on a RADIUS server basis. Default Configuration The default dead time is 0 minutes. Command Mode Global Configuration mode Security Commands 1063