Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 2262

• ip-address - Specifies the IP address or subnet of the management station(s). If no IP address is specified, all management stations are permitted. Both IPv4 and IPv6 addresses are accepted. If a subnet is specified, it may be entered in the form of an IPv4 address, followed by a space and a forward slash, followed by the decimal number of significant bits with no intervening spaces, or the IP address may be followed by an IPv4 mask in dotted quad notation. The range of IPv4 significant bits is 1 to 31 bits. Default Configuration No community group is defined. Command Mode Global Configuration mode User Guidelines The group-name parameter can be used to restrict the access rights of a community string. When it is specified, the software: • Generates an internal security-name. • Maps the internal security-name for SNMPv1 and SNMPv2 security models to the group-name. The community name may include any printable characters except a question mark, a backslash, or an at sign. Enclose the string in double quotes to include spaces within the name. The surrounding quotes are not used as part of the name. The CLI does not filter illegal characters and may accept entries up to the first illegal character, or reject the entry entirely. Example The following example maps a community access string dell_community to group dell_group and restricts access to host 192.168.29.1. console(config)# snmp-server community-group dell_community dell_group ipaddress 192.168.29.1 Switch Management Commands 2262