Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 2165

• event-number-The index of the Event that is used when a rising or falling threshold is crossed. (Range: 1- 65535) • delta-The sampling method for the selected variable and calculating the value to be compared against the thresholds. If the method is delta, the selected variable value at the last sample is subtracted from the current value, and the difference compared with the thresholds. • absolute-The sampling method for the selected variable and calculating the value to be compared against the thresholds. If the method is absolute, the value of the selected variable is compared directly with the thresholds at the end of the sampling interval. • startup direction-The alarm that may be sent when this entry is first set to valid. If the first sample (after this entry becomes valid) is greater than or equal to the rising-threshold, and direction is equal to rising or rising-falling, then a single rising alarm is generated. If the first sample (after this entry becomes valid) is less than or equal to the fallingthreshold, and direction is equal to falling or rising-falling, then a single falling alarm is generated. • owner string-Enter a name that specifies who configured this alarm. If unspecified, the name is an empty string. Default Configuration No alarms are configured. Command Mode Global Configuration mode User Guidelines This command has no user guidelines. Example The following example configures the following alarm conditions: • Alarm index - 1 • Variable identifier - 1.3.6.1.2.1.2.2.1.10.5 • Sample interval - 10 seconds • Rising threshold - 500000 Switch Management Commands 2165