Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 999

Output Parameter Description Maximum Users The maximum number of clients that can be authenticated on the interface if the interface is configured as multi-auth host mode. Guest VLAN ID The VLAN id to be used to authorize clients that time out or fail authentication due to invalid credentials. This is applicable only for 802.1x unaware clients. Unauthenticated VLAN ID The VLAN id to be used to authorize clients that that time out or fail authentication due to invalid credentials. This is applicable only for 802.1x clients. Critical VLAN ID The VLAN ID to be used to authorize clients that time out due to unreachable RADIUS servers. Authentication Violation Mode The action to be taken when a security violation occurs on a port. Authentication The action to be undertaken for data clients when all RADIUS Server Dead Action servers are found dead. Authentication The action to be undertaken for voice clients when all RADIUS Server Dead Action servers are found dead. for Voice Authentication The action to be undertaken for data clients when a RADIUS Server Alive Action server comes alive after all configured RADIUS servers were found dead. Command History Output updated in version 6.6 firmware. Example The following example shows the output for a single Ethernet interface. console#show authentication interface gigabitethernet 1/0/8 Authentication Manager Status Enabled Interface Gi1/0/8 Port Control Mode auto Host Mode multi-domain Open Authentication Disabled Authentication Restart timer 30 Security Commands 999