Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 2161

Admin Displays the requested power delivery state, which is either Auto or Never. Status Displays the operational state which is one of Off, Searching, On, Faulty, Testing, TestFail, Requesting, or Overload. Class Displays the class power range for a single interface or the (Measured/Assigned) class, which is one of Class0, Class1, Class2, Class3, Class4, Class5, Class6, Class7, Class8, or Unknown. Total Power The switch input power (watts). Threshold Power The power draw that will cross the power threshold (watts). Consumed Power The power fed to the powered devices (watts). Usage Threshold The percentage of total power available minus the reserved power. Power Management The configured power management mode. Mode Power Detection Mode The configured power detection scheme. High Availability Mode The configured mode for perpetual and fast PoE. Overload Counter A count of the number of times an overload condition was detected. Short Counter A count of the number of times the port was turned off because a short was detected. Denied Counter Absent Counter Invalid Signature Input Voltage Input Current A count of the number of times the port was turned off due to power management. A count of the number of times the port failed capacitor or resistor detection. A count of the number of times an invalid signature was detected. The momentary voltage being fed to the PoE chip by the main power supply (in volts). The momentary current being fed to the PoE chip by the main power supply (in milliamps). Switch Management Commands 2161