Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 157

Command Description Modea dos-control icmp Enables Maximum ICMP Packet Size Denial of GC Service protections. dos-control l4port dos-control sipdip dos-control tcpflag Enables L4 Port Denial of Service protection. GC Enables Source IP Address = Destination IP GC Address (SIP=DIP) Denial of Service protection. Enables TCP Flag Denial of Service protections. GC dos-control tcpfrag Enables TCP Fragment Denial of Service GC protection. rate-limit cpu show dos-control show system internal pktmgr storm-control broadcast Configures the rate in packets-per-second for the GC number of IPv6 data packets trapped to CPU when the packet fails to be forwarded in the hardware due to unresolved hardware address of the destined IPv6 node. Displays Denial of Service configuration PE information. Displays the configured CPU rate limit for PE unknown packets in packets per second. Enables Broadcast storm control. IC storm-control multicast Enables the switch to count multicast packets IC together with broadcast packets. storm-control unicast Enables unicast storm control. IC a. For the meaning of each Mode abbreviation, see Mode Types. Management ACL Command deny (management) management access-class management access-list no priority (management) Description Modea Defines a deny rule. MA Defines which management access-list is used. GC Defines a management access-list, and enters GC the access-list for configuration. Removes a permit or deny condition from a MA Management Access list. Dell EMC Networking CLI 157