Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 304

Command Mode Privileged Exec mode, Global Configuration mode and all Configuration submodes User Guidelines This command displays information about the attributes "icmp-type", "icmpcode", "igmp-type," "fragments," "routing," and "source and destination L4 port ranges." It displays the committed rate, committed burst size and the ACL rule hit count of packets matching the ACL rule. This matching packet counter value rolls over upon reaching the maximum value (18446744073709551615 or 264 -1). For an ACL with multiple match rules, processing occurs in order until a rule is matched. Only the counter associated with the matching rule is incremented. (e.g., consider an ACL with three rules, rule 1 does not match, and rule 2 is matched. Rule 3 is not processed. The counters for rule 1 and rule 3 are not incremented.) If an ACL rule is configured with a rate limit, the counter value is the matched packet count (i.e., both the forwarded and dropped packets are counted). If an ACL rule is configured without a rate limit, the counter value is the count of either the permitted or denied packets. ACL counters do not interact with DiffServ policies. ACL counters do not interact with PBR counters. ACL hit counters are associated with the ACL, not the interface on which the ACL is applied. An ACL applied to multiple interfaces will display identical (or nearly identical) counts for each interface. The count displayed is the sum of matching packets received or transmitted on all associated interfaces. Command History Updated in 6.3.0.1 firmware. Examples The following example displays the configured IP ACLs. console(config)#show ip access-lists Current number of ACLs: 4 Maximum number of ACLs: 100 ACL Name Rules Count Interface(s) Direction Layer 2 Switching Commands 304