Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 201

Command match ipv6 address Description Specifies an IPv6 address match criteria for a route map. Modea RM set ipv6 next-hop Specifies an adjacent next-hop router in RM the path toward the destination to which the packets should be forwarded. set ipv6 default next-hop Specifies an adjacent default next-hop RM router in the path toward the destination to which the packets should be forwarded. set ipv6 precedence Specifies the precedence in the IPv6 RM packet header in the path toward the destination to which the packets should be forwarded. show ipv6 policy Shows which IPv6 policy route maps are PE, GC configured on an interface. a. For the meaning of each Mode abbreviation, see Mode Types. Router Discovery Protocol Command encapsulation ip irdp holdtime ip irdp maxadvertinterval ip irdp minadvertinterval ip irdp multicast ip irdp preference Description Modea Enables Router Discovery on an interface. IC Configures the value, in seconds, of the hold- IC time field of the router advertisement sent from this interface. Configures the maximum time, in seconds, IC allowed between sending router advertisements from the interface. Configures the minimum time, in seconds, IC allowed between sending router advertisements from the interface. Sends router advertisements as IP multicast IC packets. Configures the preference of the address as a IC default router address relative to other router addresses on the same subnet. Dell EMC Networking CLI 201