Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 219

Command Description Modea debug spanning-tree Traces spanning tree BPDU packet reception PE and transmission. debug tacacs Enables debug tracing of TACACS+ PE debugging. debug transfer Enables debug tracing of file transfers. PE debug udld Enables the display of UDLD packets or event PE processing. debug vpc Enables debug traces for the specified protocols GC debug vrrp Enables VRRP debug protocol messages. PE exception core-file Configures the core dump file name. GC exception dump Configures the core dump location. GC exception protocol Enables full core dumps. GC exception switch-chip- Enables the dumping of the switch chip GC register registers in case of an exception. ip http timeout-policy Configures the timeout policy for closing HTTP GC and HTTPS sessions to the local HTTP server. show debugging Displays packet tracing configurations. PE show exception show supported mibs Displays the core dump configuration PE parameters, the current or previous exception log, or the core dump file listing. Displays the internal message queue PE, allocations. GC show supported mibs Displays the HTTP server status and PE, configuration. GC show supported mibs Displays the implemented SNMP MIBs. PE, GC snapshot bgp Dumps a set of BGP debug information to S capture the current state of BGP. write core Generates a core file on demand and either, PE reboots the switch or tests the core file configuration. a. For the meaning of each Mode abbreviation, see Mode Types. Dell EMC Networking CLI 219