Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 225

Command Description Modea nsf Specifies non-stop forwarding. GC ping Sends ICMP echo request packets to another UE node on the network. process cpu threshold Configures the rising and falling thresholds for GC the issuance of the CPU overload SNMP trap and notification via a SYSLOG message. quit Disconnects the serial connection to the remote UE unit on a stack member. reload Reloads the operating system. PE set description Associates a text description with a switch in SG the stack. slot Configures a slot in the system. GC show banner Displays banner information. PE show buffers Displays the system allocated buffers. UE or PE show checkpoint statistics Displays the statistics for the checkpointing PE process. show cut-through mode Show the cut-through mode on the switch. PE show hardware profile Displays the hardware profile information for PE portmode the 40G ports. show idprom interface Displays the optics EEPRM contents in a user- UE or PE readable format. show interfaces Displays the traffic statistics for one or multiple UE interfaces. show interfaces advanced firmware Displays the firmware revision of the PHY for a PE port. show interfaces Displays the static and dynamic parameters for UE or PE the optics. show memory cpu Displays the interface utilization. PE show memory cpu Checks the total and available RAM space on PE the switch. show msg-queue Displays the internal message queue allocations. PE, GC Dell EMC Networking CLI 225