Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 951

• exec-Provides accounting for a User Exec terminal sessions. • commands-Provides accounting for all user executed commands. • dot1x-Provides accounting for DOT1X user commands. Only the default method is available for dot1x. • default-The default list of methods for accounting services. • list-name-Character string used to name the list of accounting methods. • start-stop-Sends a start accounting notice at the beginning of a process, and a stop accounting notice at the end of a process. • stop-only-Sends a stop accounting notice at the end of the requested user process. • none-Disables accounting services on this line or for 802.1X. • method-Use either TACACS or RADIUS server for accounting purposes. Default Configuration Accounting is not enabled by default. Command Mode Global Configuration User Guidelines An accounting list is identified by the default keyword or a user-specified list_name. Accounting records, when enabled for a line-mode, can be sent at both the beginning and at the end of the session (start-stop) or only at the end (stop-only). If none is specified, accounting is disabled for the specified list. If tacacs is specified as the accounting method, accounting records are transmitted to a TACACS+ server. If radius is the specified accounting method, accounting records are transmitted to a RADIUS server. Note the following: • A maximum of five Accounting Method lists can be created for each exec and commands type. • Only the default Accounting Method list can be created for RADIUS. There is no provision to create more. Security Commands 951