Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1568

• prefix-length-Length of prefix, in bits. Must be preceded with a forward slash (/). (Range: 0-32 bits.) • longer-prefixes-Indicates that the ip-address and subnet-mask pair becomes the prefix, and the command displays the routes to the addresses that match that prefix. • vrf-name-The name of the VRF instance on which the command operates. If no VRF parameter is given, information for the default (global) router instance is shown. • static-Display statically configured routes. • ecmp-groups-Display the ECMP groups in the routing table. • hw-failure-Display the routes that failed to be added to the hardware forwarding table due to hash collisions or a table full condition. • track-table-Display the tracked static routes for the selected VRF or the global routing instance. • net-prototype-Display the tracked static routes for the selected VRF or the global routing instance. Default Configuration This command has no default configuration. Command Mode User Exec, Privileged Exec modes, Global Configuration mode and all Configuration submodes User Guidelines The VRF identified in the parameter must have been previously created or an error is returned. The VRF parameter is only available on the N3000-ON/N3100-ON/N3200ON series switches. If the subnet mask is specified, then only routes with an exact match are displayed. For example: show ip route 192.168.2.0 /24 If only an IP address is specified, the best route for the IP address is displayed. For example: Layer 3 Routing Commands 1568