Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1370

network (IPv6 Address Family Configuration) In IPv6 address family configuration mode, the network command identifies network IPv6 prefixes that BGP originates in route advertisements to its neighbors. Syntax network prefix mask network-mask [ route-map rm-name ] no network prefix mask network-mask [ route-map rm-name ] network ipv6-prefix/prefix-length [ route-map rm-name ] no network ipv6-prefix/prefix-length • prefix-An IPv4 address prefix in dotted decimal notation. • network-mask-The network mask for the prefix in dotted-quad notation (e.g., 255.255.0.0) where a zero bit in the mask indicates a don't care condition for the corresponding address bits. • ipv6-prefix-An IPv6 network prefix. This argument must be in the form documented in RFC 2373 where the address is specified in hexadecimal using 16-bit values between 0x00 and 0xff and separated by colons. • prefix-length-The length of the IPv6 prefix given as part of the ipv6prefix. Required if a prefix is specified. A decimal value in the range 1 to 128 that indicates how many of the high-order contiguous bits of the address comprise the prefix (the network portion of the address) in /length format. A slash mark must precede the decimal value in /length format. • rm-name-The name of a route map used to filter prefixes or set attributes of prefixes advertised by this network. The route map statements are evaluated in order, and the first match terminates processing of the route map. If the specified route map does not exist, the network prefix is not advertised (all routes are denied). Default Configuration No networks are advertised by default. Command Mode IPv6 Address Family Configuration Layer 3 Routing Commands 1370