Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 181

IP Routing Command Description Modea encapsulation Configures the link layer encapsulation type for IC the packet. ip icmp echo-reply Configures an IP address on an interface. GC ip icmp error-interval Limits the rate at which IPv4 ICMP error GC messages are sent. ip load-sharing Configures the hash algorithm for ECMP GC routes. ip directed-broadcast Enables the forwarding of network-directed IC broadcasts. ip policy route-map Applies a route map on an interface. IC ip redirects Enables the generation of ICMP Redirect IC messages. ip route Configures a static route. Use the no form of GC the command to delete the static route. ip route default Configures the default route. Use the no form GC of the command to delete the default route. ip route distance Sets the default distance (preference) for static GC routes. ip routing Globally enables IPv4 routing on the router. GC ip unnumbered Identifies an interface as an unnumbered IC interface and specifies the numbered interface providing the borrowed address. ip unnumbered gratuitous- Enables installation of a static interface route to IC arp accept the unnumbered peer upon receiving a gratuitous ARP. ip unreachables Enables the generation of ICMP Destination IC Unreachable messages. match ip address Specify IP address match criteria for a route RM map. match length Configures packet length matching criteria for a RM route map. Dell EMC Networking CLI 181