Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 221

Command Description Modea show snmp user Displays the configuration of users. PE show snmp views Displays the configuration of views. PE show trapflags Displays SNMP traps globally or displays PE specific SNMP traps. snmp-server community Sets up the community access string to permit GC access to SNMP protocol. snmp-server community- Maps SNMP v1 and v2 security models to the GC group group name. snmp-server contact Sets up a system contact (sysContact) string. GC snmp-server enable traps Enables SNMP traps globally or enables specific GC SNMP traps. snmp-server engineID local Specifies the Simple Network Management GC Protocol (SNMP) engine ID on the local switch. snmp-server filter Creates or updates an SNMP server filter entry. GC snmp-server group Configures a new SNMP group or a table that GC maps SNMP users to SNMP views. snmp-server host Specifies the recipient of SNMP notifications. GC snmp-server location Sets the system location string. GC snmp-server user Configures a new SNMP Version 3 user. GC snmp-server view Creates or updates a Simple Network GC Management Protocol (SNMP) server view entry. snmp-server v3-host Specifies the recipient of Simple Network GC Management Protocol Version 3 (SNMPv3) notifications. snmp-server source-interface Selects the interface from which to use the IP GC address in the source IP address field of transmitted SNMP traps and informs. a. For the meaning of each Mode abbreviation, see Mode Types. Dell EMC Networking CLI 221