Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1136

Default Configuration There is no default configuration for this command. Command Mode Privileged Exec mode, Global Configuration mode and all Configuration submodes User Guidelines The command accepts Ethernet interface identifiers. The following describes the fields in the output. All times are in seconds: • Transmit Period -The time period between two successive EAP RequestId packets if the Supplicant does not respond 1 - 65535 sec 30 sec • Supplicant Timeout-The timeout period when waiting for a response from the Supplicant1 - 65535 sec 30 sec • Server Timeout -The timeout period when waiting for a response from the RADIUS Server1 - 65535 sec 30 sec • Maximum Requests -The maximum number of EAP packet retransmissions to a Supplicant other than RequestId packets 1 - 20 sec 2 • Maximum Request-Identities -The maximum number of EAP RequestId retransmissions to a Supplicant 1 - 20 sec 2 • Quiet Period -The time the authenticator waits after timing out a supplicant before restarting authentication 60 sec • Max Users -The maximum number of authenticated supplicants on the port 1-64 64 Example console#show dot1x interface gigabitethernet 1/0/10 Administrative Mode Disabled Dynamic VLAN Creation Mode........ Disabled Monitor Mode Disabled Port Admin Mode Gi1/0/10 auto Oper Mode -----------N/A Reauth Control -------FALSE Reauth Period ---------3600 Security Commands 1136