Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1073

Default Configuration By default, VSA Attribute 26, Vendor ID 9, and Sub-type 1 are not processed by the switch. Command Mode Global Configuration mode User Guidelines This command does not affect processing of any VSA's other than VSA Attribute :q1 26, Vendor ID 9, Sub-type 1. It does not affect processing of Voice VLAN or Admin/Login. Predefined ACL Selection using VSA Attribute 26 This method selects an ACL that is already configured on the switch. The extended-access-control-list-name is the name of an existing ACL preconfigured on the switch. The ACL need not be statically pre-configured on the port prior to RADIUS configuring the ACL on the port prior to authorizing the port (it would be removed in any case as statically configured ACLs on a port are removed prior to configuring a dynamic ACL). ip:inacl={ extended-access-control-list-name } ipv6:inacl={ extended-access-control-list-name } • The ip token indicates an IPv4 ACL name follows the equals sign. • The IPv6 token indicates an IPv6 ACL name follows the equals sign. • The extended-access-control-list-name token identifies an IP/IPv6 Extended ACL Name of an existing ACL. The name is case sensitive. • The tokens ip:inacl and ipv6:inacl are in lower case and are followed by an equals sign with no intervening white space. Different authentication sessions, as in the case of the data and voice VLAN authenticating independently, may both have Dynamic ACLs. It is recommended that the DACLs be carefully designed so that they work in harmony, such as, at a minimum, no ACL numbers are duplicated across the DACLs. DACLs are applied at the port level and are capable of affecting any traffic ingressing the port. Predefined ACL Examples ip:inacl=Named_ACL Security Commands 1073