Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1419

Path attribute length error A received path attribute has a length value that exceeds the remaining length of the path attributes field. Invalid ORIGIN code A received UPDATE message included an invalid ORIGIN code. Unexpected first ASN in The AS Path attribute from an external peer did not AS path include the peer's AS number as the first AS. Invalid AS path segment The AS Path includes a segment with an invalid type segment type. Invalid BGP NEXT HOP The BGP NEXT HOP is not a valid unicast address. Bad BGP NEXT HOP The BGP NEXT HOP was either the receiver's IP address or an IP address outside the subnet to the peer. Invalid AGGREGATOR The AGGREGATOR attribute was invalid. attribute Unrecognized well-known An UPDATE message contained a path attribute with path attribute the Optional flag clear, but this router does not recognize the attribute. Missing mandatory path An UPDATE message was received without a attribute mandatory path attribute. Missing LOCAL PREF attribute An UPDATE message was received from an internal peer without the LOCAL PREF attribute. Invalid prefix in UPDATE An UPDATE message received from this peer contained NLRI a syntactically incorrect prefix. Command History Introduced in version 6.2.0.1 firmware. Updated in version 6.3.0.1 firmware. Example console#show ip bgp neighbors Remote Address 10.10.10.10 Remote AS 65000 Peer ID 0.0.0.0 Peer Admin Status START Peer State IDLE Local Interface Address 10.10.10.3 Local Port 179 Remote Port 54474 Layer 3 Routing Commands 1419