Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 1371

User Guidelines BGP supports up to 64 networks. The network command may also be used specify a default route (network 0.0.0.0 mask 0.0.0.0). If a route map is configured to set attributes on the advertised routes, match as-path and match community terms in the route map are ignored. A match ip-address prefix-list term is honored in this context. If the route map includes such a match term, the network is only advertised if the prefix list permits the network prefix. If the specified route map does not exist, the network is not advertised. Example console(config-router-af)#network 10.130.14.55 255.255.0.0 Default Configuration The default tag value is 0. There is no default metric or route map configured. Command Mode Router BGP Configuration mode User Guidelines The configured metric value is specific to the routes distributed. Use the default-metric command to configure a default metric for all redistributed routes. The RIP metric is a hop count. The metric for a redistributed route limits the distance the route can be redistributed in the RIP network. Since the maximum valid metric in a RIP network is 15, redistributing routes into RIP with a metric of 12 implies that the route can only be redistributed across 3 hops in the RIP network. In general, redistributing routes from BGP into a RIP network is not recommended. Command History Introduced in version 6.2.0.1 firmware. Layer 3 Routing Commands 1371