Dell N3200-ON EMC Networking N-Series Switches CLI Reference Guide version 6.7 - Page 2260

• community-string-The SNMP community identifier. See SNMPCOMMUNITY-MIB for further information. (Range: 1-20 printable characters other than an at sign, a backslash, or a question mark.) • ro-Indicates read-only access. • rw-Indicates read-write access. • su-Indicates SNMP administrator access. • ip-address-Specifies the IP address or subnet of the management station(s). If no IP address is specified, all management stations are permitted. Both IPv4 and IPv6 addresses are accepted. If a subnet is specified, it may be entered in the form of an IPv4 address and a space, followed by a forward slash, followed by the decimal number of significant bits with intervening space, or the IP address may be followed by an IPv4 mask in dotted quad notation. The range of IPv4 significant bits is 1 to 31 bits. • view-name-Specifies the name of a previously defined view. For information on views, see the User Guidelines below. (Range: 1-30 characters) Default Configuration No community is defined. Defaults to read-only access if not specified. Command Mode Global Configuration mode User Guidelines The @ character is reserved for future use. It is not accepted in a community string. The question mark is the CLI help trigger. It may not be used in a community name. The backslash is a programmatic escape character. It may not be used in a community name. You cannot specify a view-name for su, which has access to the whole MIB. You can use the view name to restrict the access rights of a community string. When it is specified: • An internal security name is generated. • The internal security name for SNMPv1 and SNMPv2 security models is mapped to an internal group name. Switch Management Commands 2260