Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1025

Parameter Backoff Time Error Rate Threshold Error Rate Wait Time Noise Threshold Noise Wait Time Minimum Scan Time Dell Networking W-Series ArubaOS 6.5.x | Reference Guide Description An AP will only move to a new channel if the new channel has a lower interference index value than the current channel. Free Channel Index specifies the required difference between the two interference index values before the AP moves to the new channel. The lower this value, the more likely it is that the AP will move to the new channel. After an AP changes channel or power settings, it waits for this backoff time interval before it asks for a new channel/power setting. The minimum percentage of PHY errors and MAC errors in the channel that will trigger a channel change. Minimum time in seconds the error rate on the AP has to exceed its defined error rate threshold before it triggers a channel change. Maximum level of noise in a channel that triggers a channel change. Minimum time in seconds the noise level has to exceed the Noise Threshold before it triggers a channel change on the AP. Minimum number of times a channel must be scanned before it is considered for assignment. Best practices are to configure a Minimum Scan Time between 1-20 scans. show ap config | 1025