Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 725

Parameter load-aware-scan -threshold max-tx-power min-scan-time min-tx-power 725| rf arm-profile Description Range Load aware ARM preserves - network resources during periods of high traffic by temporarily halting ARM scanning if the load for the AP gets too high. The Load Aware Scan Threshold is the traffic throughput level an AP must reach before it stops scanning. The supported range for this setting is 020000000 bytes/second. (Specify 0 to disable this feature.) Default 1250000 bytes/seconds Maximum effective isotropic radiated power (EIRP) from 3 to 33 dBm in 3 dBm increments. You may also specify a special value of 127 dBm for regulatory maximum to disable power adjustments for environments such as outdoor mesh links. This value takes into account both radio transmit power and antenna gain. Higher power level settings may be constrained by local regulatory requirements and AP capabilities. 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 127 In 6.4.4.0 and later releases: l default-a: 18 dBm l default-g: 9 dBm In earlier 6.4.x releases: l default: 127dBm Minimum number of times a channel must be scanned before it is considered for assignment. The supported range for this setting is 02,147,483,647 scans. Best practices are to configure a Minimum Scan Time between 1-20 scans. Default: 8 scans 12,147,483,64 7 Recommend ed Values: 120 8 scans Minimum effective isotropic radiated power (EIRP) from 3 to 33 dBm in 3 dBm increments. You may also specify a special value of 127 dBm for regulatory minimum. This value takes into account both radio transmit power and antenna gain. 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 127 In 6.4.4.0 and later releases: l default-a: 12 dBm l default-g: 6 dBm In earlier 6.4.x releases: Dell Networking W-Series ArubaOS 6.5.x | Reference Guide