Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 949

show ap ap-group show ap ap-group {ap-name |bssid |ip-addr } Description Show the AP group settings for an individual AP. Syntax Parameter ap-name bssid ip-addr Description Show data for an AP with a specific name. Show data for a specific Basic Service Set Identifier (BSSID). An AP's BSSID is usually the AP's MAC address. Show data for an AP with a specific IP address. Enter the IP address in dotteddecimal format. Usage Guidelines Use this command to display the contents of an AP's group profile. If you know the name of the group whose profile settings you want to view, use the command show ap-group . To view a list of all configured AP groups on your controller, use the command show ap-group. Examples In the example below, the output of this command lists the profiles associated with the AP group Corp13. (host) #show ap ap-group AP2 AP group "corp13 Parameter --------Virtual AP Virtual AP Virtual AP Virtual AP 802.11a radio profile 802.11g radio profile Wired AP profile Ethernet interface 0 link profile Ethernet interface 1 link profile AP system profile VoIP Call Admission Control profile 802.11a Traffic Management profile 802.11g Traffic Management profile Regulatory Domain profile SNMP profile RF Optimization profile RF Event Thresholds profile IDS profile Mesh Radio profile Mesh Cluster profile Value ----corp13-guest corp13-ether-wpa2 corp13-ether-voip corp13-ether-comm default default default default default corp13 default N/A N/A corp13-channel-profile default handoff-aggressive default ids-low-setting default N/A Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap ap-group | 949