Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 2109

Parameter 802.11g Beacon Rate 802.11a Beacon Rate Video Multicast Rate Optimization Advertise QBSS Load IE Advertise Location Info Advertise AP Name 802.11r Profile Enforce user vlan for open stations Description The beacon rate for 802.11g (use for Distributed Antenna System (DAS) only). Using this parameter in normal operation may cause connectivity problems. The beacon rate for 802.11a (use for Distributed Antenna System (DAS) only). Using this parameter in normal operation may cause connectivity problems. The rate for video multicast frames. Enables the AP to advertise the QBSS load element. The element includes the following parameters that provide information on the traffic situation: l Station count: The total number of stations associated to the QBSS. l Channel utilization: The percentage of time (normalized to 255) the channel is sensed to be busy. The access point uses either the physical or the virtual carrier sense mechanism to sense a busy channel. l Available admission capacity: The remaining amount of medium time (measured as number of 32us/s) available for a station via explicit admission control. The QAP uses these parameters to decide whether to accept an admission control request. A wireless station uses these parameters to choose the appropriate access points. APs that are part of this VAP will broadcast their GPS coordinates in the beacons and probe response frames as part of a vendorspecific Information Element. If this parameter enabled, APs will broadcast the AP name configured by the ap-name command. This option is disabled by default. The associated dot11r-profile with the SSID profile. Shows the strict enforcement of data traffic only in user's assigned vlan (Open stations only). 2109| show wlan ssid-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide