Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 1296

show ap spectrum device-duty-cycle show ap spectrum device-duty-cycle {ap-name }|{ip-addr } freq-band 2.4ghz|5ghz Description Shows the current duty cycle for devices on all channels being monitored by the spectrum monitor or hybrid AP radio. Syntax Parameter ap-name Description Name of the spectrum device for which you want to view spectrum information. ip-addr IP address of the spectrum device for which you want to view spectrum information. freq-band 2.4ghz|5ghz View information for a specific radio type, either 2.4 GHz or 5 GHz. Usage Guidelines The FFT Duty Cycle table in the output of this command shows the duty cycle for each radio channel. The duty cycle is the percentage of time each device type operates or transmits on that channel. For additional details about non-Wi-Fi device types shown in this table, see Non-Wi-Fi Interferers on page 1299. This chart is not available for W-AP68 access points. A hybrid AP on a 20 MHz channel will see 40 MHz Wi-Fi data as non-Wi-Fi data. Examples The output of this command shows that video devices sent a signal on channels 153 and 157 during 99% of the last sample interval. Device Duty Cycle Table (in %) Device Type 149 153 157 161 165 149+ 157+ ----------- Generic Interferer 0 0 0 0 0 0 0 WIFI 5 0 5 12 8 0 12 Microwave 000000 0 Bluetooth 000000 0 Generic Fixed Freq 0 0 0 0 0 0 0 Cordless Phone FF 0 0 0 0 0 0 0 Video 0 99 99 0 0 0 0 Audio 000000 0 Generic Freq Hopper 0 0 0 0 0 0 0 Cordless Network FH 0 0 0 0 0 0 0 Xbox 000000 0 Microwave Inverter 0 0 0 0 0 0 0 Cordless Base FH 555550 0 Total:7 Dell Networking W-Series ArubaOS 6.5.x | Reference Guide show ap spectrum device-duty-cycle | 1296