Dell W-Series 304 Instant 6.5.1.0-4.3.1.0 CLI Reference Guide - Page 408

Parameter detect-chopchop-attack detect-client-flood detect-cts-rate-anomaly detect-disconnect-station detect-eap-rate-anomaly detect-fata-jack-attack detect-ht-40mhz-intolerance detect-invalid-address detect-malformed-associationrequest detect-malformed-auth-frame Description Enable/disable detection of ChopChop attack. Range true false Enable/disable detection of client flood attack. true false Enable/disable detection of CTS rate anomaly. true false In a station disconnection attack, an attacker spoofs the MAC address of either an active client or an active AP. The attacker then sends deauthenticate frames to the target device, causing it to lose its active association. Use this command to enable the detection of disconnect station attack. true false Enables Extensible Authentication Protocol (EAP) handshake analysis to detect an abnormal number of authentication procedures on a channel and generate an alarm when this condition is detected. true false Enable/disable detection of FATA-Jack attack true false Enables or disables detection of 802.11n 40 MHz intolerance setting, which controls whether stations and APs advertising 40 MHz intolerance will be reported. true false Enable/disable detection of invalid address combinations true false Enable/disable detection of malformed association requests. true false Enable/disable detection of malformed authentication frames true false Default false disable disable enable false enable false false disable disable 408| ids dos-profile Dell Networking W-Series ArubaOS 6.5.x | Reference Guide